The Head Rest mounted Dog Guard is designed to give maximum guard
security whilst not damaging the vehicle trim as with normal dog guards.
- Place the guard into the rear of the vehicle against the rear seats – it may be necessary to fold the seats forward when positioning the guard (see vehicle handbook).
- When the guard is in a central position behind the rear seats, secure the rear seats. The guard is supplied with two head rest lock assemblies (see illustration below), assemble as illustrated.
- From the rear of the vehicle, pass the hook end of the lock assembly through the mesh and secure around the inner head rest support bar with the pressure plate to the rear of the mesh.
- Rotate the Thumb screws in a clockwise direction, this will secure the hooks to the head rest support bars and secure the guard to the rear of the seat.
Your Barjo guard is now ready for use. To remove, reverse the above procedure.
 |
 |
| Guard Fitted |
Lock Assembly Fitted Hook |

Hook Back Plate Thumb Screw Head Rest Lock Assembly